Chrysler's modern lineup runs on two very different key fobs — the Stellantis-wide smart key shared across the 300 and several Dodge and Jeep models, and the dedicated 6-button key built for the Pacifica's sliding doors. Getting the right leather cover comes down to matching your exact fob, not just your model. This guide walks through each shape we carry and what it fits.
Which Chrysler Key Fobs We Cover
Below are the two Chrysler key fob shapes we currently make covers for, each shown with the models it fits.
Series [1] Key — Chrysler 300 (4-Button and 5-Button)
- Chrysler 300
Both the 4-button and 5-button version of this smart key fit. This same shell is also used on the Dodge Charger, Challenger, Journey and Durango, and the Jeep Grand Cherokee, Renegade and Compass of the same era.
Shop the Chrysler Series [1] Cover →
Series [02-6B] Key — Chrysler Pacifica (6-Button)
- Pacifica
The 6-button smart key, with the two sliding-door buttons below lock and unlock.
Shop the Chrysler Pacifica Cover →
Before you order: always confirm your key shape and button count against the photos above (or your current fob in hand) before ordering. The 300's key is shared across several Dodge and Jeep models with overlapping years, so compare your key closely or send us a photo and we'll confirm the right cover before you buy.
Why Leather Works on a Chrysler Key
Chrysler leans on soft leather seating and brightwork trim throughout its cabins, and a hand-stitched veg-tanned leather cover carries that same material language into your pocket or bag. Beyond matching the interior, the leather cushions the fob against scratches and everyday drops, softens the plastic edges that tend to show wear first, and ages into a richer patina the longer you carry it — all without blocking a single button.
Final Thoughts
Whether you're driving a 300 with the shared Stellantis key or a Pacifica with its dedicated 6-button fob, there's a Chrysler-specific leather cover here shaped to your exact key. Match your key against the photos above, and if anything looks close but not quite right, we're happy to double check before you order.
FAQ
Will a leather cover interfere with my key fob's signal or range?
No. Our covers are cut and stitched to leave the fob's internal antenna and buttons unobstructed, so remote range and signal strength are unaffected.
Does this work with my Chrysler's smart-key or push-button start system?
Yes. These covers are made for standard remote key fobs, including the smart-key fobs used in Chrysler's push-button start models — the cover doesn't block the proximity sensor.
My exact Chrysler model or year isn't listed above — what should I do?
Send us a photo of your key fob and we'll match it to the closest shape we carry, or let you know if we don't yet have a cover for it rather than guess.
How do I take care of the leather over time?
Keep it dry, wipe it down with a soft cloth, and avoid prolonged direct sunlight. The veg-tanned leather will naturally darken and develop a patina with regular use — that's part of the look.
Browse the full lineup in our Chrysler Key Fob Cover collection, or contact us if you'd like help confirming your fob shape before you order.