Volvo & Polestar Key Tag Case (VV-03) Assembly Guide

Volvo & Polestar Key Tag Case (VV-03) Assembly Guide

Elevate your driving experience with a premium, handcrafted leather fit.

Specifically designed for the sleek Volvo and Polestar key tags, the VV-03 case offers a secure and minimalist way to carry your essential remote. Follow the visual guide above for a perfect assembly.

Quick Assembly Steps

1. Insert: Slide your Volvo or Polestar key tag into the leather sleeve.

2. Position: Push it firmly all the way to the bottom. Ensure the device is fully seated so the protruding leather tab is ready for the hardware.

3. Connect: Slide the metal hardware over the extended leather tab. Make sure the tab is centered and pushed deep into the hardware slot.

4. Fasten: Carefully insert the two small screws. As you tighten them, they will pierce and secure the leather tab within the hardware.

⚠️ Important Note: Hardware & Care

• Screwdriver Not Included: Please note that a precision screwdriver is not included in the package. You will need a small, properly sized screwdriver to complete the assembly.

• Prevent Scratches: Use a screwdriver that fits the screw head perfectly. Apply steady, downward pressure to prevent the driver from slipping, which could scratch the metal hardware or the premium leather.

• Check Firmness: Tighten both screws until they are flush with the hardware to ensure your key tag stays safely attached during daily use.